IMPORTANT INFO!
EMO And His New Home Connectivity And Functions:
- Only 1 EMO is able to connect/use Home Station.
- Carefully connect/press the tower into the plate, leaving no gap
(Never try forcefully disconnecting them again without reason as it is very tight, and might snap/break it!). - Power EMO and Home Station up by connecting the original inclusive power cable supplied only. (The dynamic matrix display will show re-building the house, followed by Bluetooth re-connection animations) same as the charging mini green lights below will blink 3 times.
- Connect EMO with the app and configure the network for EMO. (Need Firmware Update 2.0.0 or later!).
- Touch the button for at least 5 seconds. To pair EMO with the Home Station (wait for the Bluetooth dynamic matrix display animation).
- Place EMO on the Home Station to start charging or have a rest.
(To check if EMO is charging, repeat the process and watch the charging animation with sound in his eyes. look between his legs if the mini green light is steadily lit.) - Touching the button softly will change the 20 (as of now) dynamic matrix display animations.
- Continue touching the button till it turns black to turn off dynamic matrix display animations but not directly to power off the Home Station.
- When the Home Station is connected to power but appears blank or off, you can still charge EMO by placing him in the correct position and waiting for his eye-charging animation to appear. This will be followed by the Home Station’s battery charging animation indicator before returning to the off position.
- When the Home Station is connected to power but no dynamic matrix lights are on, and you place Off EMO, the Home Station’s battery charging animation indicator will appear, along with the three blinking blue lights on EMO’s headphones. After 20-25 seconds, EMO will turn back on."
For more official info about Home Station features please click the link below:
New Update Logs!
Take note that there is a touch button below the front tower to pair him, turn on/off, and change the dynamic matrix animations on the display screen. (Meaning: as soon as you plug in the charger and pair it, you can always put EMO on it for charging).
The new Firmware Update v2.0.0 or later must be installed/updated on EMO and EMO PET App takes the full functions for Home Station features for all EMO (Old/New).
BEST REGARDS, STAY SAFE AND HAPPY ALWAYS!